Quick Guide
Hello there! We understand how frustrating it can be to purchase a new IGET 6000 puff vape and find out it’s not working after charging it. But don’t panic just yet! I’m here to help you as a seasoned e-cigarette technician who has fixed countless “not working” issues for vapers.
Check out these four reasons why your IGET Bar Plus not working properly:
- Battery Issues
- Faulty pod
- Device malfunction
- Physical damage
Let’s take a closer look at the IGET Bar Plus 6000 and its issue with not working properly. Grab your vape and let’s dive in!
Introduction
The IGET Bar Plus 6000 Puffs has become a favourite among vapers due to its rechargeable and replaceable nature, cost-effectiveness, and superior quality compared to other IGET Vapes. However, like all vaping devices, the IGET Bar Plus Pods not working is not immune.
To enhance the vaping experience, IGET has conducted research and analysis to identify the four most common reasons why the IGET Bar Plus not working. We have also provided practical solutions and prevention measures to address these issues.
IGET Bar Plus Not Working – How It Work?
To troubleshoot issues with your IGET Bar Plus vape, it’s important to first understand how it works. Knowing each step of the vape’s working process is key to identifying the root cause of the problem and applying the correct fix.
The IGET Vape Bar Plus is made up of two major parts:
- Disposal Pod (Mouthpiece+Atomizer)
- Vape Device (Battery)
If any of these parts malfunction, your Bar Plus IGET Vape may not function correctly. Here’s how the vape works:
- Inhaling on the mouthpiece, air enters the vape through the airflow.
- The coil in the atomizer starts to work, and the heating system starts to heat the e-liquid.
- The e-liquid is vaporized into a richly flavoured vapour.
- The vapour reaches your mouth through the mouthpiece.
This is a smooth and efficient workflow for the IGET Plus Bar. However, if any part of the process goes wrong, it can result in the IGET Plus Bar not working.
IGET Bar Plus Not Working – Why It Happen?
Once you understand how IGET Bar Plus work, analyzing the top 4 reasons why the IGET Bar Plus not working becomes easy and understandable.
1. IGET Bar Plus Not Working – Battery Issues
The battery is essential for the normal operation of the IGET Bar Plus. Without it, the device cannot generate smoke and odor through heating. If the Bar Plus Vape is not working, the following battery issues may be the cause:
- Loose battery connection
If you find that your IGET Bar Plus cannot be used even after charging, the issue may be caused by a loose battery inside the device. You can gently shake the device to check for any sounds or loose parts after separating the IGET 6000 Puffs Pods from the device body.
- The charger is broken
If the bottom indicator light of your Bar Plus 6000 does not light up after connecting it to the charger and it does not remain in the charging state, or if it still cannot operate normally after being fully charged for an hour, then your charger may be damaged.
2. IGET Bar Plus Not Working – Faulty Pod
The pod is a crucial component of IGET Bar Plus as it stores e-liquid to provide flavours and vapor. In the event that Bar Plus fails to operate, the pod and the e-liquid inside it play an important role.
- E-liquid depletion
If you notice that the vapour from your IGET Vape Bar Plus is decreasing, the flavour is becoming milder, and the sound of the vape working has changed, it may indicate that the device is running out of e-liquid. In other words, when the e-liquid runs out, the pod’s life is over, and the IGET Bar Plus 6000 will stop working.
- E-liquid leakage
E-liquid leakage is a common reason for an IGET Bar Plus not working. Here are four signs of e-liquid leakage to look out for:
- Oil Sensation in the Mouth: If you feel oil in your mouth while vaping, it may be due to oil leakage during the use of the IGET Plus 6000.
- Odor: The e-liquid in Bar Plus vape has a distinct scent. If you smell this scent when the IGET Bar Plus is not in use, it may be due to oil leakage.
- Touch: If the exterior of the Bar Plus feels oily, it may be due to oil leakage.
- Leakage Traces: If you frequently place your Bar Plus Vape in a certain location and find oil stains there, it may be due to oil leakage from the vape.
By recognizing these signs, you can determine if e-liquid leakage is the reason why your I GET Bar Plus is not working properly. To learn more about the oil leakage problem, I recommend reading our analysis article on the IGET Bar Plus leaking.
- Poor contact between the device and the pod
The base of the pod is made of metal, and the device is equipped with three circular magnets to keep the pod securely in position. If the magnets on the device lose their magnetic force or the bottom of the pod becomes corroded, this can affect their connection. As a result, the e-liquid in the pod may not heat and vaporize properly, which can cause the IGET Bar Plus to stop working.
3. IGET Bar Plus Not Working – Device Malfunction
The components inside the device play a crucial role in the proper functioning of the I GET Bar Plus. We can visually inspect the condition of the internal parts. Please pay attention to the following situations that may occur in your vape:
- The conductive holes on the pod are blocked
The conductive circular holes of the pod are blocked, preventing it from properly connecting with the device and working correctly.
- The conductive posts on the device are damaged
Two conductive posts on the device are damaged, resulting in no power being supplied to the pod.
- Clogged mouthpiece/airflow
If your Bar Plus is not functioning, it’s possible that the mouthpiece or airflow is clogged. Simply inspect the mouthpiece and airflow at the bottom of the Bar Plus to check for any foreign material.
4. IGET Bar Plus Not Working -Physical Damage
Due to human or environmental factors, IGET Bar Plus may suffer physical damage that can affect its external shape or internal structure and cause the Bar Plus 6000 not working. Examples of such damage include:
- Accidental damage: Dropping, stepping on, etc. may cause damage to the Bar Plus battery, heating components, or the Bar Plus Pods.
- Improper cleaning: Attempting to clean the Bar Plus device with water or cleaning agents may damage its electronic components or affect the taste and performance of the e-liquid.
- Storage in extreme environments: Extreme temperatures, both high and low, can affect e-liquid flow. Light can also degrade e-liquid flavour. Additionally, high pressure can cause device damage, while low pressure can cause leaks.
IGET Bar Plus Not Working – How To Solve & Prevent It?
It is important to store your Bar Plus vape in a safe and secure place to prevent damage to its internal parts. Keep it away from areas where it could be accidentally knocked over or stepped on. Remember to also keep it out of reach of children and pets.
To keep safe and proper when IGET Bar Plus charging, avoid using outdated or low-quality charging cables. Damaged cables can cause short circuits and fire hazards. Exposed metal wiring can also lead to electrical leakage and pose risks to vapers. So, replace old cables with new ones for optimal safety.
If you want to learn more about the precautions for IGET Bar Plus charging, please read our related articles.
IGET Bar Vape Plus has a replaceable pod system that allows for easy switching between e-liquid flavours without refilling or changing the coil. To maintain a consistent and enjoyable vaping experience, regularly check the e-liquid level and replace the pod when it’s low or leaking to prevent device damage.
The IGET Bar Plus device should be kept away from magnets and corrosive objects to avoid demagnetization of the three magnets inside and damage to the pod, which can result in the malfunctioning of the device.
There are 8 circular conductive holes at the bottom of the pod. If these holes are blocked, the pod cannot make contact with the device and will not charge. You can wipe the bottom of the pod with a clean tissue or cloth.
Check that the mouthpiece and airflow are not blocked. If they are, you can use a cotton swab or needle to gently remove any foreign material. To prevent this from happening again, wipe the mouthpiece with a tissue and store the Bar Plus Vape in a clean and cool place after use.
Now that we know the reasons why IGET Bar Plus may not work, what methods can we take to avoid these situations? Before using Bar Plus Vape, let’s review some preventive measures!
- Keep the IGET Bar Plus vape in a cool, dry place between 15°C and 25°C at normal atmospheric pressure.
- To prevent rusting of the casing or damage to the components, avoid exposing the device and pod to water or other liquids.
- Do not expose the Bar Plus to direct sunlight or moisture, as this can cause damage and leaking.
If the Bar Plus device or pod gets dirty, simply wipe the surface with a clean tissue or dry cloth. Do not use water or other cleaning agents, as this may damage electronic components or affect the taste and performance of the e-liquid.
o avoid purchasing fake GET Bar Plus Vape, it is recommended to buy directly from the official website, or other authorized channels. Here are some guidelines to distinguish between the real and fake ones.
- Check the serial number of your Bar Plus.
- Purchase IGET Bar Plus 6000 from reputable places.
- Be wary of the low prices of Bar Plus vape.
- Pay attention to the IGET Bar Plus package and label.
At IGET Vape, you can buy genuine products and verify their authenticity through their online service. Here is the product list:
👉 Click to find out more about the latest and greatest discounts on IGET Flavours!
👉 Check out all the IGET Bar Plus Flavours! Get your special flavours!
Verdict
After reading this article, you now have a detailed understanding of the four main reasons why the IGET Bar Plus may not work properly. If you encounter this issue, simply follow the instructions provided in the article. However, it is important to remember that for safety reasons, do not attempt to disassemble the IGET Bar Plus yourself.
If your IGET Bar Plus cannot be fixed, consider purchasing a new one from IGET Vape. This website and the IGET Bar Plus manufacturer are reliable, offering one-year free after-sales service for their products, and are committed to providing you with the most satisfying vaping experience possible. Happy vaping!
👉 IGET Bar Not Working: Decoding The Top 6 Probable Reasons
FAQ About IGET Bar Plus Not Working
The IGET Bar Plus Refill Pod (also known as the IGET Bar Plus refill pod), an integral component of the IGET Bar Plus device, houses the e-liquid which, upon user’s inhalation, is heated within the device to create vapor for a seamless, flavorful vaping experience.
Related Blogs
IGET Bar Plus Charging Instructions: 5 Effective Guides
Confused about how to recharge your IGET Bar Plus Vape? Follow my step-by-step IGET Bar Plus charging instructions for a successful vaping experience.
IGET Bar Not Working: Decoding The Top 6 Probable Reasons
Why is my IGET Bar not working? This question bothers a lot of vapers. Read this article, and you will learn the top 6 Probable Reasons!
IGET Bar Plus Review 2023: Latest, Unique, Revolutionary
Hello IGET Vape fans! If you like the IGET Bar, you’ll love the game-changing upgrade – the IGET Bar Plus. Read on for the IGET Bar Plus review.